Manual Hydraulic Shearing Machine Metal Cutting Shear With 3.2m Blade QC12Y-4X3200 manufacturer from China JINQIU MACHINE TOOL COMPANY

Manual Hydraulic Shearing Machine Metal Cutting Shear With 3.2m Blade

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: QC12Y-4X3200

Manual Hydraulic Shearing Machine Metal Cutting Shear With 3.2m Blade

<span s

Manual Hydraulic Shearing Machine Metal Cutting Shear With 3.2m Blade

Describle:

Hydraulic shearing machine
Small order is acceptable, have a good market all over the world.

It is adopted hydraulic driving, the frame steelwelded structure which

has sufficient strength and rigidity.

The machine is equiped with a power back gauge on whicn, a manual

fine-adjusting, mechanism for blade clearance, ashadw light device

enribing cutting operatikon, a connter, a sensitive and reliable safety barrier.

It can also be equipped with a support conveyor.

Whole steel welded frame with full strength and rigidity.

Hydraulic upper transport.

Hydraulic press device with reliable safety bar.

Rapid cutting stroke adjustment is adopted, cutting frame can be adjusted

ensuring priduction efficiency increase when cutting short sheet.

Back-gauge station adopts motor-driven measure with fine manual adjustment.

Cutting counter device.

Light line device so it is easy to draw line for cutting

Contrusction:

Hydraulic top-drive, steadiness and reliability

Steel-welded construction, vibration to eliminate stress, with high strength

and good rigidity

Mechanical stop, steel torsion bar to maintain synchronization, high precision

Motorized-adjusting device of back gauge and ram's stroke, fine adjusting

by hand wheel, numerical display

Travel limit protection, full machine guarding with safety interlocker

Specification and Parameters:

No.	Name		Unit	Specification
1	Max. cutting thickness		mm	6
2	Max. cutting width		mm	3200
3	Material strength		MPa	450
4	Cutting angle		degree	1.5
5	Backgauge stroke		mm	20-600
6	Strokes		min-1	14
7	Housing distance		mm	3420
8	Length of blade		mm	3300
9	Worktable height		mm	802
10	Axial plunger pump	Model		25MCY14-1B
		Flow	ml/r	25
		Pressure	MPa	31.5
11	Main motor	Model		Y132M-4, B5
		Power	kW	7.5
		Speed	r/min	1460
12	Backgauge motor	Model		Y80M2-6, B3
		Power	kW	0.55
		Speed	r/min	970
13	Overall dimensions	Length	mm	3840
		Width	mm	1610
		Height	mm	1630
14	Weight		kg	6260
15	Capacity of tank (L-HL46 hydraulic oil)		kg	257

Adjustment of the gap between blades:

The proper adjustment of the gap between blades is one of important factor which directly effect the cutting quanlity and the service life of the blades.So the value of the gap recommened refers to the following chart.

When adjusting the gap(refer to Fig4.2),only unscrew the clamping screw (3)then turn the handwheel to the value needed,finally clamp the screw(3) tightly.

Techncial Data: