Electrical 3200 T Allsteel Press Brake Steel Bending Equipment
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
Electrical 3200 T Allsteel Press Brake Steel Bending Equipment
<span style="font-s
Electrical 3200 T Allsteel Press Brake Steel Bending Equipment
Machine Performace:
the machine can bend long work piece in two press brake work together.
the machien also can operate in individual
Single and linkage action are available.
Torque synchronization, electrical and hydraulic synchronization are guaranteed.
Different CNC controllers to make multi-axis controlling are optional.
Hydraulic / Mechanical ram, synchronised positive stop design, ram stroke controlled
by precision mechanical nut depth stops built into each cylinder.
Parallelism is ensured by torsion bar that can be easily adjusted by clutch system.
Segmented heavy duty 86° offset top punch is segmented for return bend clearance,
complete with European style quick release punch holder with an adjustable wedge
clamping system for crowning.Intermediate clamp has safety key to stop punch dropping.
Conveniently mounted control box on pendant for quick swivel and adjustments.
Mono-block steel frame design, welded then machined to ensure minimal bed deflection
under load Enclosed rear gate with micro safety switches complete with sliding rear
door for easy access.
European quick release style top punch and clamping system, allowing operator
to change position of tooling to suit multiple requirements on complex applications.
This feature ensures minimum down time, more productivity and results in reduced
cost per finished product.
Sliding steel fabricated sheet supports enabling a wide range of material sizes to
be aligned and supported at the correct required height. This feature is achieved
with a "T" slot machined down the total length of the die bed, sheet supports are
also adjustable vertically to assist in supporting material with return bends folded.
Adjustable sliding blocks control the machines beam to provide desirable open
height distance to the (slow speed) mute bending point.
Machine Feature:
Tandem mode can be achieved by PSH or WE67K through the linkage unit.
The tandem mode is applicable to the super long work pieces processing.
Being used extensively in the field of engineering plant, poles and tubes production.
The two machines can be either operated respectively or tandemly.
Either machines configuration and performance are as good as the single PSH
Tandom mode can be achieved by PSH or WE67K through the linkage unit.
Technical Data:
|
SN |
Name |
Unit |
Value |
||
|
1 |
Nominal pressure |
KN |
2*1600 |
||
|
2 |
Bending Length |
mm |
2*9000 |
||
|
3 |
Distance Between Column |
mm |
6500 |
||
|
4 |
Stroke of ram |
mm |
450 |
||
|
5 |
MAX. Opening Height |
mm |
1200 |
||
|
6 |
Throat Depth |
mm |
1100 |
||
|
7 |
Worktable Width |
mm |
600 |
||
|
8 |
Bending Thickness |
mm |
25(σ≤490N/M²) |
||
|
9 |
Speed |
Idle Load |
mm /s |
≥70 |
|
|
10 |
Work |
mm /s |
6.5 |
||
|
11 |
Return |
mm /s |
≥55 |
||
|
12 |
Main Motor Power |
KW |
2*55 |
||
|
13 |
Size(L×W×H) |
mm |
2 x 9240x8133x8250 |
||
|
14 |
Machine Weight |
kg |
2*177000 |
||
|
15
|
Accuracy
|
Ram accuracy |
mm |
≤0.02 |
|
|
Ram Positioning Accuracy |
mm |
≤0.02 |
|||
|
Workpiece Straightness |
mm |
0.75 / m |
|||
